Have you ever been in a situation where you are trying to tighten a bolt, but it just won't stop spinning? This can be incredibly frustrating, especially if the bolt is crucial to secure the assembly.

Here's some good news: even if you don't have any experience tightening bolts, there are ways to ensure that your bolt stays put! This blog post will provide step-by-step instructions on effectively and safely tightening a tightly spun or stuck bolt hole, so it doesn't keep spinning.

We'll also discuss potential causes of why your fastener is not holding its place so that better preventive solutions can be applied in the future. Ready to learn more? Let's get started!

How to tighten a bolt that keeps spinning

1. What do I need to know before I start?

Before tightening a bolt that keeps spinning, ensure you have the right tools for the job. Depending on the size and type of bolt, different wrenches, sockets, a thread locker adhesive, and spanners may be required.

It's also important to understand what material is used in constructing your assembly to use the correct tools for that material. Additionally, you should know what type of thread the bolt has (standard or metric) and the head size so that you can choose a compatible wrench.

2. What is the best way to tighten a bolt that keeps spinning?

The best way to tighten a stuck or spinning bolt is to slowly and carefully apply pressure while turning the wrench. This allows you to gradually increase the tension on the bolt until it stays in place. You can also try using an impact driver designed for high-torque applications. Use the correct attachment and set to avoid over-tightening the bolt.

3. What are some of the most common causes of a spinning bolt?

The two most common causes of a spinning bolt are lack of lubrication and incorrect wrench size. If you have been using an improper size wrench, it may not be able to securely hold onto the head of the bolt, or angle grinder, leading to slipping or spinning.

Additionally, if you are working with metal components, the friction between them can cause a bolt to become stuck and start spinning. This is why applying lubricant (e.g., oil or grease) when assembling metal components is important.

How to Tighten a Bolt that Keeps Spinning: 8 Super Tricks | Drill Villa

4. How do I know if I'm doing it correctly?

You can use several methods to check if you're tightening the bolt correctly. First, turn it very slowly while keeping pressure on the wrench until you feel resistance. If the bolt still spins after this, repeat with more pressure applied to the wrench until it no longer moves.

Additionally, you can use a torque wrench to measure the force being applied to the bolt. This ensures that you are not over-tightening or under-tightening it.

5. What can I do to prevent the bolt from spinning in the future detail in steps.

To help prevent future spinning, there are a few steps you can take.

1. Ensure the bolt is installed correctly and the threads are lined up properly with the nut or deeper hole it is fastening. This will ensure that when you tighten the bolt, it will thread correctly and not loosen as easily due to a misalignment.

2. Use a thread locker, such as Loctite or Permatex, to secure the longer bolt and nut. This will help prevent the bolt from loosening due to vibration or other external forces.

3. Regularly inspect and check your bolts for tightness and ensure they are not excessively worn. Inspections should be done at least once a month or more frequently if the bolt is subject to constant vibration or strain.

4. Use an anti-seize lubricant on your bolts and fasteners to help reduce friction and prevent rusting. This will also help with future tightening and loosening of the bolt.

5. Consider using a torque wrench when tightening bolts, as this will help you apply the right amount of pressure without over or under-tightening. It will also help prevent future loosening due to vibration, shock, or other external forces.

By following these few steps and properly maintaining your fasteners and bolts, you can ensure that they stay properly tightened and won't spin.

These simple steps will help you save time, money, drill bit, and frustration when tightening bolts in the long run.

How to Properly Install & Remove Carriage Bolts | Fasteners 101 - YouTube

6. What common mistakes do people make when tightening a bolt?

When tightening a bolt, it is important to remember that each process step should be completed with care. Common mistakes people make when trying to tighten a bolt include the following:

1. Over-tightening: It is easy to get carried away when tightening a bolt and turning it too far, which can cause damage to the surrounding material or the bolt itself. When tightening, it is important to use just enough force to ensure that the assembly is secure without applying too much pressure.

2. Cross-threading: Another common mistake is cross-threading, which can happen easily if you are not careful when threading a nut onto a bolt. Cross-threading can cause damage to the threads of the bolt cutter and make it difficult to tighten or remove. Be sure to carefully align the threads before tightening.

3. Stripping: In some cases, applying too much force when tightening a bolt can strip the head or nut splitter and render them unusable. If you feel extra resistance when turning the wrench, it is likely time to stop and assess the situation before continuing.

Completing each step properly ensures that your bolts will stay secure and in place for as long as possible. If done correctly, you should never have a problem with a bolt spinning or becoming stuck again.


Is it okay to use a power drill to tighten a bolt?

No, a power drill or driver is not recommended to tighten a bolt. This can be dangerous and can cause serious structural damage.

Additionally, using a power tool for fastening can easily lead to over-tightening the bolt, resulting in stripped threads, broken bolts, and other problems that could damage your assembly.

Should I use lubricant on a bolt that is spinning?

Yes, lubricant can be very useful in helping to keep a tight fit on your bolt. If the threads are not already coated with lubricant, applying some can help reduce friction and make it easier for you to tighten the bolt without it spinning.

However, choose your lubricant carefully - some lubricants may damage the threads or other parts of the assembly. It is also important to note that over-lubrication can lead to bolt slippage, so use caution when applying lubricant.

What are some consequences of using the wrong size wrench on a bolt?

Using the wrong size wrench on a bolt can have several consequences. First, it could cause damage to the stripped bolt by stripping or deforming its threads. This makes it more difficult to properly tighten or loosen the fastener in the future.

Second, if you use a too-small-sized wrench, or screw extractor, you won't be able to apply enough torque to tighten the bolt, leading to a loose assembly properly.

Finally, using the wrong size wrench can also cause damage or injury to yourself if too much torque is applied, resulting in a broken tool or worse.

For these reasons, it is important to use the correct size wrench when tightening bolts and other fasteners.

Where can I find more information on this topic?

Many helpful resources are available online if you're looking for more information on tightening a bolt that keeps spinning.

The Fastener Group is an excellent resource, providing detailed explanations and diagrams of the various types of bolts and techniques to apply when tightening them.

Additionally, HowStuffWorks has a great article with step-by-step instructions on how to tighten a spinning bolt.

Finally, the Bolt Depot website lists a variety of tools and supplies that you can use when working with bolts, as well as detailed instructions for various tightening techniques.

By taking advantage of these resources, a few different reasons you'll be able to gain the knowledge necessary to effectively and safely loosen or tighten any stuck or spinning bolts.

Why are my screws spinning?

If your screws keep spinning, it's likely due to a few possible causes. One common cause is insufficient torque - if you are over-tightening the bolt, it may spin from too much force being applied.

Another cause could be dirt or debris in the threads of the screw, which can prevent proper contact and lead to a spin. Finally, the screws may be too long for the application and are spinning freely.

No matter what the cause, understanding how to tighten a spinning bolt properly can help keep your assembly secure without damaging any of the components.


If you have a spinning bolt that won't stay tight, there are a few things you can do to try and fix the problem. First, make sure that the surface area around the bolt is clean so that there is a good connection.

If the bolt still doesn't tighten, you can try adding some lubricant to the bolt or using a different type of monkey wrench.

Finally, if all else fails, you can always replace the bolt head with a new one. By following these steps, you should be able to tighten any spinning bolts successfully.

Share this post